Recent Water Damage Posts

Ice Dams Are Simple To Understand

11/24/2021 (Permalink)

Icicles on a roof winter background image Mitigating damage caused by ice Dams isn't easy. The best solution is to bring in water damage repair specialists to do the job.

Ice Dams Are Easy To Comprehend.

The key to comprehending the formation of an ice dam lies in basic roof construction. For this discussion, the roof consists of four layers.

  1. Rafters support the roof.
  2. The roof deck is nailed to the rafters.
  3. The Underlayment covers the roof deck.
  4. The shingles are nailed through the underlayment to the roof deck.

When snow covers the roof, problems may occur. If the roof deck is warmer than the outside air temperature, ice dams often form as described below.

  1. The warmth from the roof deck causes the snow touching the roof to melt.
  2. The water runs over the shingles, under the snow, and refreezes at the bottom of the roof.
  3. This process continues, causing a large ice dam to build up.
  4. The water behind the dam backs up under the shingles and causes a roof leak.

Ice Dams Are Preventable

In new construction, they should be virtually nonexistent. In existing homes, properly installed ridge and soffit vents should solve the problem. Roof rakes to remove snow and heating cables can also help eliminate them.

Ice Dams Can Cause Extensive Damage

You may not have a problem with ice dams in Niwot, CO, but water damage happens in many ways. Sometimes it happens quickly and is obvious. Other times it is slow and subtle. Ice dams usually form gradually. By the time you see a stained ceiling or crumbling plaster, the destruction may be significant. Affected areas may show up in many locations.

  • Roof deck
  • Rafters
  • Insulation
  • Ceilings
  • Walls
  • Lights and other fixtures

Ice Dams Are Manageable

Mitigating damage caused by them is usually not for the do-it-yourselfer. These problems need to be addressed quickly before mold establishes a foothold. The best solution is to bring in water damage repair specialists to do the job quickly and completely.

3 Factors That Affect the Cost of Water Damage in Your Home

11/10/2021 (Permalink)

Wet carpets after loss of water are cleaned by specialists A small water loss in this home left these carpets in the living room area soaked, fortunately, SERVPRO went and restored the place without a problem.

Three Things That Influence the Cost of Water Damage in Your Home

Water damage is a common issue that many homeowners experience in Berthoud, CO, and not knowing the cost of cleanup can make the experience more stressful. If your home is damaged by water, there are three factors that may impact the cost of the damage repair.

1. Size of Impacted Area

An average flood can affect many different areas in your home. Smaller spaces that have been affected by water damage are easier to clean, meaning you will likely pay less for the time and labor it takes to restore the area. However, if an entire area of your house is covered in several inches of water, it will take much longer to remove the water and clean the space.

2. Type of Water

The type of water in your home can drastically affect the cost of repairs. For example, if your basement water appears murky in color, this could indicate that the water is contaminated. Contaminated water is more difficult to clean due to the potentially hazardous materials within the water, whereas water that is clear can be cleaned with fewer safety precautions.

3. Structure of Home

The age of your home and the materials with which your house was built can affect the overall cost of cleanup. Older homes are more likely to experience a rapid breakdown of materials and therefore more structural damage, meaning that the cost of damage repair may be greater. Alternatively, homes that have been built more recently can better withstand water damage.

Knowing what will impact the final cost of water damage repair can help you be better prepared if your house is negatively affected by water. If your house has experienced flooding, it’s essential to seek out help from a company that specializes in water damage cleanup in order to get an accurate estimate of the cost and to identify long-term solutions.

How To File an Insurance Claim for Water Damage

9/14/2021 (Permalink)

Two men extracting water from a flooded basement If you suffer any water damage in your home, you should call SERVPRO! we are here for your service.

 How Can I Submit A Water Damage Insurance Claim

Making an insurance claim in Berthoud, CO, can be a nightmare. Not only are you dealing with the damage caused by a storm or water leak, but you also have to worry about jumping through the hoops of your insurance provider. Knowing how to file a claim may help reduce your stress at least a bit. Remember, many residential water damage experts can help you through the entire claims filing process.

Get in touch with your provider. Not all water damage is covered by insurance companies. Your coverage may depend on the source of the flood as well as the exact policy you have. Getting in touch with your insurance provider right away can help you better understand your options.


Document the damage. Take pictures of any of the damage done to your home. Having physical proof may help you showcase your need for an insurance claim.


Complete the paperwork. Chances are your insurance company is going to send you lots of paperwork. While it may seem like a hassle, it's better for you if you fill out the forms as quickly as possible. This will allow your provider to better help you. It can even speed up the restoration process.

Meet the adjuster. Your insurance company will want to better understand the damage done to your home, so it will set you up with one of its adjusters. This person will assess your home, so be ready to show him or her exactly where the damage is.


Start the repairs. Some of the repairs needed after a pipe bursts may not be able to wait. Make temporary repairs as needed, but make sure to document the damage prior to making any changes. Once your adjuster has made a final assessment, you can have a restoration team start the final repairs.

No matter the situation, filing an insurance claim is never fun. Completing the process as quickly as possible will help you put the problem behind you.

When It Floods: What To Do and What To Avoid

9/14/2021 (Permalink)

A home with water damage in its hall and several clean up machines Our team is available around the clock, 365 days a year. Call us for any water damage cleanup and restoration needs

What To Do And What To Avoid During Floods?

When your home in Lyons, CO, floods, whether from a storm or a broken pipe, your first instinct is probably to start getting rid of water and cleaning up. To makes sure the repair process goes smoothly, however, there are a few steps you should follow. The first priorities are safety and documentation, and then you can call flood restoration specialists to lead in the cleanup efforts.

Safety First

Water in the home can render it temporarily uninhabitable, so there are a few things to look for when you return:

  • Damage to water, sewer or power lines
  • Warped surfaces, such as floors or walls
  • Damaged foundation
  • Visible cracks or holes in any part of your home’s structure

Try to avoid wading in standing water, as it could be electrically charged. Just in case, it is a good idea to wear knee-high rubber boots to absorb possible shocks. Even if the water looks clean, avoid contact with your skin, as it could be contaminated, especially if you suspect it might have come from a broken pipe or sewer line.

Document Damage

Your insurance adjuster is going to need to know the extent of the damage. Be vigilant about keeping your cell phone charged so you can take pictures for the report. Avoid cleaning before you document the damage, or your settlement could be smaller because the problem will seem smaller than it actually is. Once you have adequate documentation, call your insurer. The earlier you file a claim, the sooner you can get the money for repairs or reimbursement.

Cleanup

Rather than attempt to clean up the water yourself, it is a good idea to hire a professional. Experienced restoration specialists can help locate the cause of the problem, whether the flooding came from groundwater or a broken pipe. They also know how to overcome water damage so that you do not experience mold or mildew problems later.

When your home in Lyons, CO, experiences flooding, it is natural to want to put it behind you quickly. With the proper process, however, you can be assured that the resolution is complete.

Oh, No! The Kitchen Sink Is Leaking

6/30/2021 (Permalink)

Drainage system under sink leaking Leaking sink.

Is a Leaking Sink An Emergency?

Have you ever found a big problem in your Longmont, CO, house? Spotting a leak coming from your kitchen sink can leave you with a sinking pit in your stomach. How can you fix this problem before it causes major flooding and a huge financial burden? You need to keep these three simple steps in mind.

1. Stop the Water

As soon as you notice a leak, you need to make sure the water in the home is properly managed. This means turning off the water supply to your kitchen sink. If there isn't a shutoff valve for this appliance, you may need to turn off the supply for your entire house. You can usually find the main shutoff valve near the utility meters or by the curb.

2. Call Your Provider

Any type of flooding in your house can cause some serious damage. You may have to replace building materials, clean furnishings and remove mold all because of a leak under your kitchen sink. Because the damage can be so costly, many homeowners choose to turn to their insurance policies for a little financial help. Whether you have the coverage needed to help pay for this incident, you need to call your insurance agent. This person will be able to help you understand your coverage and start a claim if possible.

3. Hire a Damage Specialist

To help you better address this problem, you should turn to the help of a residential water remediation specialist. This professional can help you with your kitchen repair and water cleanup. The water damage cleanup crew knows how to remove standing water, salvage water-logged materials and remediate your home. Quick remediation done by a professional can help you get back to normal sooner.

Flooding can happen in any home for almost any reason. Because water can start to fill your home in the blink of an eye, you need to know what to do in the case of an emergency.

What To Know About Water Damage and Homeowners' Insurance

3/8/2021 (Permalink)

wet wooden floor, air mover beside baseboard Residential water damage in Erie, CO.

What To Know About Water Damage and Homeowners' Insurance

You may expect that your homeowners' insurance will cover any water damage claim you make. However, that is not the case. Insurance does pay for professional restoration services following a sudden emergency such as bursting pipes. However, other types of losses may be excluded from coverage. Before you make a claim with your insurance provider, you should know which emergencies are included in a typical policy.

Gradual Damage
As its name implies, gradual damage occurs over time. Water losses typically fall into these categories. That is because much of your plumbing system is hidden behind walls and floors. It could take weeks or months for the problem to become visible. Some examples of gradual damage include:

  • Rot and corrosion
  • Consistently leaking pipes or faucets
  • Foundation cracks that allow water to enter your home

Homeowners' insurance usually excludes losses that result from gradual damage. However, you should check your policy or talk to your adjuster to find out the specifics of your coverage.
There are some exceptions to the gradual damage exclusion, as well. Insurance does not pay for the cost to fix broken pipe. Yet the coverage should include any harm caused by bursting pipes. This is called resulting damage. The same is true for malfunctioning washing machines or water heaters.

Sudden Damage
Sudden damage, meanwhile, occurs when there is an unexpected discharge of water into your Erie, CO, home. This could result from cracks in your hot water heater or excessive snow and sleet crushing your roof. If this accident was not caused by your negligence, it should be covered under your insurance policy.
Insurance usually does not pay for costs related to gradual damage. It thus will not help you replace broken pipes that have been leaking for a long time. Your policy may cover the harm caused by bursting pipes, however. Any sudden and accidental discharges of water should also be included.

How To Dry Hard Wood Floors After a Pipe Burst in Your Office

2/10/2021 (Permalink)

flood cut performed on drywall of commercial building, worker using drying equipment on wall Commercial water drying in Hygiene, CO.

Seven Steps For Quickly Drying Your Company

A severe pipe burst has the potential to cause extreme damage in any office. Sometimes, the impact is enough that a commercial water restoration expert becomes necessary to fix the wreckage. One source of concern is wooden floors, which warp quickly after getting wet. Here are seven steps for quickly drying your company’s boards and lessening the destruction.

1. Clear Out
Immediately remove wet equipment and rugs. Take advantage of warm days by moving everything outside and allowing the sun’s rays to work their magic.

2. Vacuum
Eliminate as much standing liquid as possible with a vacuum specifically designed for the task. Wet/dry vacuums can be purchased at home repair stores and auto parts dealers.

3. Scrub Away
Rub your floor with a disinfectant that does not generate suds. This is needed to eliminate any filth spread by your unexpected pipe burst. Follow this step with a second round of vacuuming.

4. Dehumidify
Place a dehumidifier in the center of your wet floor and leave it running on high for at least a day. Make sure you are using one that is sufficiently powerful enough for the size of the room.

5. Aerate
Place fans in each corner of your office, pointing them at the ground. Crank up the air conditioning and open windows a few inches so that moisture can escape.

6. Inspect for Mold
Spores develop quickly. A fungal surprise can sprout in as little as two days. Should your wood floor begin displaying worrisome discoloration, scrub it with a solution made from baking soda and water.

7. Test for Moisture
Even after you have taken these measures, moisture may still be present. Use an off-the-shelf tester to make certain none lingers.
Any pipe burst, no matter how small, can wreak havoc in your office. This is especially true if your building in Hygiene, CO, features wood flooring. If this happens to you, follow these instructions with the urgency your space deserves.

How To Detect Common Causes of Bathtub and Shower Leaks

12/29/2020 (Permalink)

Leakage of water from a shower cabin with glass wall that is damaged Mold can form after a shower pan leak

How To Detect Common Causes of Bathtub and Shower Leaks

Few aspects of homeownership are as frustrating to manage as a leak. When you suspect a shower or bathtub leak at your home in Berthoud, CO, you may wonder how to pinpoint the elusive cause of this potentially damaging problem. You can track down common leak causes by knowing where to look:


Check Your Shower or Bathtub Faucet
Slow faucet leaks are a common problem that many people ignore, not realizing the complications they can cause, including:

  • Corrosion of parts subjected to constant water drips
  • Staining of a bathtub's surface
  • Higher water bills from unnecessary water flow


Replacing a faulty washer usually stops a faucet leak, but sometimes it is necessary to replace the entire faucet if too many of its parts are worn.


Check Your Bathtub's Surface
Bathtub leaks can happen when damage to fiberglass or acrylic surfaces causes leaks that may not be visible immediately. If you suspect your bathtub has a crack, fill it with water and look for bubbling in spots that could indicate the damaged area. Eventually, you will also see water pooling on the bathtub's outer surface and the floor beneath it. Some bathtubs' sealants can wear away over time, leading to similar consequences and potential water damage.


Check Your Shower Floor for Water Pooling
A waterproof liner, or shower pan, exists below your shower's floor to capture water seeping through the tiles and direct it down the drain. If the liner becomes pierced, excess water does not drain. Instead, it can leak through the underlying foundation and make its way to the rooms below your bathroom, where it can damage the ceilings. Mold can form after a shower pan leak, and you may require a mold remediation company's services to sanitize your space and prevent further damage.
Flooding caused by a bathtub leak can have severe consequences for your home in Longmont, CO, but a professional flood restoration service can handle the cleanup.

Cleaning Up After a Leaking Water Heater in 3 Steps

11/24/2020 (Permalink)

Closeup of a rusty and leaking water heater A leaking water heater is a tremendous problem

Cleaning Up After a Leaking Water Heater in 3 Steps

A leaking water heater is a tremendous problem. While it is important to call the insurance company and the water damage repair specialists closest to Longmont, CO, it is necessary to reduce as much damage as possible. There is a process that can mitigate the effects of the defective heater, but you will need to complete three important steps to do so successfully.

1. Shut Off the Utilities
You need to shut off gas and water to prevent injuries and further damage. Electric devices can be shut down by pulling the corresponding breaker, while gas devices can be turned off from the thermostat's temperature dial. Find the failed water heater's main supply valve near the tank to turn it off. If that does not work, turn off your home's water main instead until help arrives. Do not forget to empty the tank by using the drain valve and a hose that leads outside.

2. Record the Damage
Your insurance agency is crucial in helping you fix the impact caused by a leaking water heater. Assist the organization by recording the damage before the cleanup. The easiest way to do so is by taking photos of the rips and tears throughout the tank. Also photograph the extent of the water damage throughout the area. These photos are helpful in determining the extent of the loss and the overall coverage.

3. Remove Excess Water
Now that the broken water heater is safe to handle and you have all necessary information, it is time to remove the extra water. If safe, use a wet vacuum to pick up both liquid and any present dirt. Pumps are also helpful in draining water out of a room. After the water is mostly gone, dry the affected location with dehumidifiers and fans. Open windows and doors also improve air circulation.
While you may not have all the equipment or expertise of a remediation crew, you can still reduce some damage. These steps help you safely handle a leaking water heater before the professionals arrive.

3 Types of Water Contamination

10/12/2020 (Permalink)

Close-up Of Flooded Floor In Kitchen From Water Leak Category 1 Water Damage comes from a clean water source, a fresh water line for a refrigerator

Which Category of Floodwater Is Affecting Your Home?

Not all types of floods are necessarily the same. The type of contaminated water present in the flood affects which kind of remediation technique needs to be performed to resolve the issue. There are 3 main types of floodwater, each categorized by the type of contamination present in the flood. Read on to determine which category of floodwater is affecting your home in Longmont, CO.

1. Clean Water Floods
Category 1 floods are the least dangerous types of floods, as they're categorized by a lack of contamination. However, this doesn't mean that you still shouldn't take them seriously. If left untreated, clean water floods can result in mold and mildew growth. These floods are typically caused by a supply line burst, excess snowmelt or rainwater on the roof, or a bathtub overflow. In theory, this water is safe for human consumption, but you should still never attempt to drink it.

2. Gray Water Floods
Category 2 floods are one step up from their clean water cousins. They do contain some degree of contamination, simply because of the flood's source. They typically are a result of an overflowing household appliance, such as a washing machine or dishwasher. Broken aquariums and sump-pump failures can also cause a gray waterflood. If left untreated for more than 48 hours, a gray waterflood can easily become a category 3 flood.

3. Black Water Floods
Category 3 floods are the most dangerous types of floods. They are categorized by contaminants such as human/animal fecal matter, raw sewage, dangerous chemicals, and other kinds of biohazards. Blackwater floods are typically caused by toilet overflow, sewage main bursts, or an overflow of contaminated water from rivers. Because of the biohazards present, you should never attempt to remediate a black water flood yourself.
Contaminated water can cause devastating damage to your residential property. It's important that you contact flood remediation experts for help resolving any type of household flood you might face.

The Top 3 Water Mitigation Procedures

8/14/2020 (Permalink)

Air mover placed on the floor of a restaurant, on the left side there are chairs and on the right side couches Water cleanup services in Niwot, CO

Mitigation Methods Used By Commercial Damage Restoration Professionals

Water damage from any source can benefit from mitigation. These measures start with reducing the extent of pipe burst cleanup or other water cleanup and continue through extraction and drying. Find out more about the three most effective mitigation methods used by commercial damage restoration professionals in Niwot, CO.

1. Containment
Containment can contribute toward limiting damage by restricting the movement of water within a structure. Depending on the amount of water, the equipment that is available and the methods in use, it may be possible to prevent water released by a supply line leaking or bursting or a plumbing backup from spreading out to affect carpeting or working its way down from one floor of a building into lower floors.

2. Extraction
Extraction can be a mitigation or water cleanup measure. Eliminating every trace of standing water and residual moisture from a structure within 24 to 48 hours is essential for discouraging mold growth. Damage caused by contaminated water requires cleaning and disinfection, while areas exposed to treated water during pipe burst cleanup may only need to be dried.

3. Drying
Drying can take hours or days depending on the extent of water damage. Getting rid of all remaining moisture and maintaining low humidity levels are imperative to discourage mold growth. Mitigation or cleanup experts may provide or recommend the use of an industrial air mover, fan or dehumidifier. Humidity levels lower than 50% can discourage mold from growing in most environments, particularly if the area has only been exposed to clean, treated water or if contamination has been cleaned and disinfected.
Trained damage cleanup professionals can recommend the right approach to pipe burst cleanup or any other type of water damage. Mitigation is the first step you should take, and it can shorten the duration of the cleanup and restoration process at a commercial property in Niwot, CO.

How You and the Pros Can Care for Wet Belongings

5/20/2020 (Permalink)

Wet wooden floor and one air mover Wet flooring in a Niwot, CO home

Even in severe flooding, all hope is not lost to salvage your belongings. With a quick response and the right cleaning techniques, you can restore items such as carpet, furniture, clothing, documents, and electronics. If you discover water home, call a professional flood remediation company to help get your home back in order.

Care for Flooring

Whether from a broken pipe, a leaking appliance, or some other cause, water damage can wreak havoc with your carpet. If you catch the problem early enough, you may be able to clean and dry your carpet and use it once again. Here are some steps you can take:

  • Pull up any wet carpet so the padding and floor underneath can dry.
  • Use a carpet cleaner and thoroughly extract all the water.
  • Dry the carpet with high-powered fans.
  • Sanitize the carpet and floor.

Care for Furniture
Items such as sofas, beds, and chairs can bear the brunt of water damage. You can also use dry cleaning to remove any water from these items. Your first step is to remove the furniture from the water. Place it in an area where it can dry. Then, use a machine to extract the water. Make sure to use a cleaning agent to disinfect the items.

Care for Electronics and Documents
When it comes to cleaning wet electronics such as computers, televisions, and stereo systems, using caution is the best approach after you discover water in home. Do not try to turn on these items. You can a cloth to gently wipe them off. However, electronics cleaning is a job you should leave to the pros. A trained technician in Niwot, CO, can safely take the device apart without inflicting further damage. The same goes for documents such as books and photos. Let a professional handle these materials. Technicians can use freeze-drying methods to preserve and restore these delicate items.
Don't let water in home destroy your most important belongings. These steps and help from a professional can help.

3 Causes of Costly Business Interruption Claims

5/6/2020 (Permalink)

Air movers placed on a carpet of an office Water damage in Berthoud, CO

Three Preventable Causes of High Interruption Claims

Large water damage caused by flooding can grind business to a halt. An interruption insurance policy is helpful for paying ongoing expenses and making up for lost revenue during restoration. These costs can add up, particularly during a prolonged closure. Learn more about three preventable causes of high interruption claims.

1. Delayed Mitigation
Many interruption insurance policies have a 72-hour waiting period between when a loss occurs and the start of coverage. This is also the most critical period of time for fixing underlying problems, such as a broken pipe, and mitigating damage. A cleanup service should quickly arrive on-site, assess the situation, and take measures to limit primary and secondary damage.
2. Incomplete Cleanup
Several phases of cleaning should take place after flooding in a commercial building. Any portion of the structure exposed to contaminated water must be pumped out, cleaned, and disinfected. Porous building materials such as carpet and drywall may need to be torn out and replaced. Failure to perform these procedures quickly and in the right order may increase the risk of mold or structural issues that result in re-contamination and necessitate prolonged or repeated closure.
3. Overlapping Services
Relying on multiple service providers can make scheduling mitigation, cleanup, and restoration more difficult. Multiple estimates can also complicate the process of making and settling a property insurance claim. Without clear lines of communication, procedures may be repeated or omitted, resulting in a more expensive, incomplete or slow restoration. A one-stop shop can provide a single estimate for a complete and efficient cleanup and rebuild.
The degree of damage, duration of closure and continued expenses will determine an interruption claim amount. While it may not be possible to prevent flooding or other damage at a business in Berthoud, CO, relying on skilled professionals from a single restoration service can allow for a lower interruption claim.

When to Worry About Your Water Heater Noises

2/17/2020 (Permalink)

Bald man covering his ears over gray background Sounds that heaters make

You have probably heard your water heater in Niwot, CO  make little ticking or tapping sounds from time to time. It can be quite confusing to know which sounds are normal and which ones are a warning that you may have a problem. There is no surefire rule about which sounds can indicate a faulty heater, but there are some guidelines to help you.

Sounds That Heaters Make

Ticking and Tapping - Those ticking sounds your heater makes are usually nothing to worry about. Heaters are designed with check valves so that water can’t flow through the pipes in the wrong direction. The ticking sound can either be the valves doing their job or it could be the pipes as water cools.
Crackling and Rumbling - The heater’s tubes can collect sediment. Water can get trapped under the sediment when the heater is not running. As the water heats it pushes through the sediment causing the crackling or rumbling. If this happens, it is time to either clean the heater or have it replaced.
Humming - Electric water heaters are typically set up vertically to the tank. Vibrations can result as water moves around the heater. The element can be tightened if this is the case.
Screeching - When water pushes through a small area it can cause this screeching or screaming sound. The valves may not be opening up properly, which will require heater repair.
Knocking - As water leaves or returns to the tank, the pipes can move slightly and hit the wall. This won’t hurt the heater but it could damage the wall. To remedy the situation, a wall hammer arrestor can be installed.

Routine Maintenance Can Help

Proactive care can extend the life of your water heater. Minerals found in water can create sediment buildup. A water softener can help to reduce that sediment in the heater. An annual water heater flush using a de-liming solution is also a smart idea.

Preventing Water Damage In Commercial Construction Projects

1/30/2020 (Permalink)

Worker looking towards the roof. Roof structure. Concept of construction Construction on Berthoud, CO

The construction of your business in Berthoud, CO, is a delicate process since any kind of water damage can seriously set back the project. Even if water pipe repair resolves the problem at hand, it can delay the job and increase the cost beyond the established budget. As a result, you and your construction crew should enact plans to prevent water losses and avoid such issues.

Pre-Construction Preparation

Proper planning before construction starts can prevent multiple small complications that can escalate into larger ones, such as a leaking or broken pipe that leads to flooded areas. As you are planning the details, think about the structures that require water.

  • Fire control and extinction
  • Plumbing system
  • Drainage
  • Mechanical devices

Ensure that construction on these systems is started as early as possible, especially before finish work. Early detection of malfunctions can encourage the contractors to build around these corrected devices and prevent incidents.

Mid-Construction Prevention

Establish a protocol in which any construction concerns are thoroughly documented and photographed for future reference. Additionally, solutions such as water pipe repair should be performed quickly, with minimal disruption to the greater project. A singular quality control director can establish high standard work guidelines and supervise their fulfillment. A dedicated team can find, record and resolve water problems for maximum efficiency. Protect vulnerable materials such as plywood and insulation with tarps and other absorbing materials in case of a water leak or a natural disaster.

Dealing With Current Water Damage

Once hostile weather clears or a construction issue is fixed, it is time to deal with the remaining water damage. You will need assistance from a water restoration company to remedy the affected areas. Experienced technicians can work with you, the construction company and the insurance agency to determine which materials can be salvaged and which can be replaced. Summoning these professionals can resume construction in a timely manner.
Water damage can enormously disrupt the opening of your new commercial location. Strong organization and preventive measures can make water pipe repair less frequent and spare your business from escalating expenses.

The Most Common Causes For Your Noisy Pipes

12/10/2019 (Permalink)

Leakage Of Water From Stainless Steel Pipe On Gray Background Leaking pipe in Lyons,CO

The Most Common Causes For Your Noisy Pipes

If you live in an older home, you have likely pondered the nightmare of a pipe break once or twice, especially when you hear those strange noises coming through your plumbing. However, not all of those noises are detrimental. Therefore, to understand what to look out for, it is necessary first to know the common sounds and their likely causes.

  • Whistling
  • Clanging
  • Hammering

Whistling
You may have heard whistling from some of your faucets in the past, and while it might be a little unnerving, it doesn't necessarily hint at a future pipe burst. In fact, whistling is most likely caused by a faulty faucet washer or a loose screw. That's right, a simple re-tightening or $2 purchase, and you can get rid of that dreadful whistle. All you need to do is turn off the water supply to the sink, dismantle the faucet, and either replace the existing, worn washer or tighten the screw.

Clanging or Hammering
The sound of the good old water hammer is another common pipe noise. However, these noises should not be taken lightly. Water does not compress, and when it is forced to stop quickly, all that pressure bounces around in the lines. Over time, consistent abuse from that pressure can result in a pipe break.

Solutions
To resolve hammering, you can instill an antihammer device, which is essentially air-chambers that are added to the system to ensure that water has a place to go without wreaking havoc on your pipes. Unfortunately, this type of project is not a DIY. You should call a plumbing specialist in Lyons, CO, to install the system and to assess and fix broken pipe in your home.
While noises from your home's plumbing can be unsettling, not every noise will produce a disaster, like a pipe break. Therefore, before you get panicked about strange sounds, call a plumber and ask for an assessment.

Why Water Damage Is a Big Deal

10/16/2019 (Permalink)

Two SERVPRO technicians assessing a water damage inside a home Assessing water damage in a Lyons, CO home

It is a sickening moment for homeowners when they enter a room and step into a pool of water. It could be from a pipe burst, a failed water heater, a leaky washing machine or a flood originating from outside. Whatever the reason, the mess will need to be cleaned up, and the quicker the better. The cleanup process has many steps and it's a good thing for homeowners to be familiar with the course of action. The first thing to do is call a reputable water cleanup company in Lyons, CO. This will get the ball rolling and often eases the worries of the property owner. It's a good feeling to have a team on site who knows how to handle the situation.

The Cleanup Process

Every water leak or calamity is unique. A broken water line is different than a sewage backup and therefore each situation requires a different approach and techniques. In general, though, the following steps should be taken:

  • Inspection and damage assessment
  • Water removal and extraction
  • Drying out of affected areas
  • Cleaning
  • Restoration

If the water source is from a pipe burst then quick pipe repair will be needed. Water removal using industrial-strength fans and wet vacs should soon follow. Further drying out of the area is accomplished by ventilators and dehumidifiers. Thorough cleaning and sanitizing will employ effective cleaning agents and specialized equipment. The restoration process, normally the final step, involves the replacement of damaged flooring, walls, ceilings and other materials saturated from flooding.

The Importance of Quick Action

Water, whether it is clean water from a pipe burst or black water from a sewage backup, has a corrosive effect on household materials. It can cause thousands of dollars of damage and create problems down the road such as mold growth and bad odors. Knowing who to call for help in Lyons, CO, is a good line of defense against water leaks.

Where to Start when Restoring a Flooded Basement

8/21/2019 (Permalink)

Flooded basement in Berthoud, CO

How to Approach Flood Cleanup

When flood season comes to Berthoud, CO, it can hit hard. The impact of the excess water is most likely to be felt by homeowners in the form of basement flood damage. Whether the sump pump failed or just couldn't keep up with the water flow, homeowners may be left scratching their heads. Feelings of where to start and what to do can be overwhelming. The following three steps may give some direction as to how to approach flood cleanup and prevention of future incidents.

1. Remove Water

Before any repairs can be made, all of the water must be removed from the basement. Some people prefer to call a water removal and restoration company for assistance. Flooded basement water removal may look something like the following:

  • Hiring an electrician to evaluate the risk of electric shock
  • Getting the sump pump up-and-running to remove sitting water
  • Using a shop vacuum to suck-up the last inch or so of water
  • Lifting carpet and using large fans to dry-out moisture
  • Sanitizing with warm water and disinfectant to prevent mold growth

2. Repair Damage

Once the area has been completely dried, repairs may be in order. Checking your home flood insurance coverage may be a good place to start. While salvaging some belongings may be an option, it is unwise to try to save anything which uses electricity or gas. If your gas furnace or electric outlets took on water in the flooding, replacement over repair is the safe route to go.

3. Plan for Future Flood Prevention

Now that the basement in clean, dry and repairs are complete, it's time to plan ahead for the future. There is nothing worse than putting time and money into basement flood restoration only to have it ruined all over again. Consider the following preventative measures:

  • Install a back-up pump
  • Create outside drainage for storm runoff
  • Buy a generator for use during a power outage

Flooding in Berthoud, CO, is common. If a basement flood catches you by surprise, follow these three basic tips to get cleanup underway.

Longmont Floodplain

5/8/2018 (Permalink)

Floodplain

Longmont Flood Information

In 2013 Longmont suffered the largest flood in its history.  The Longmont local government has worked to build it's Office of Emergency Management to be prepared for our future.   

Emergencies can happen at any time. Whether they are natural or man-made emergencies, residents and businesses should always be prepared. The Office of Emergency Management has added great information on their webpage to help  Longmont Be Ready.

Please look for the current information regarding large-scale emergencies there. You may also find additional information on Facebook at "Longmont Fire Police OEM" or on Twitter @LongmontPS.

During the first hours and days following a disaster, essential services may not be available. Residents must be able to act on their own. Preparedness is everyone's job. Everyone should plan ahead for disaster including service providers, businesses, civic and volunteer groups, industry and neighborhood associations.